Grohe 29704Z 5 way Diverter valve

A reliable Grohe 29704Z 5 way Diverter valve designed for heating large or small quantities of water stored in open topped vessels and bat.

Download product schematic

Suitable for heating large or small quantities of water stored in open topped vessels and baths, where permanently installed immersion heaters are not practical or desirable.

Controls: Standard — None. Automatic — capillary type thermostatic up to +30°C

Installation: It is recommended that the electrical supply is protected by an RCD and that the heater is fully earthed. The element must be fully submerged before being energised.

Important: Please pass the following information to a qualified competent electrician prior to installation. Ensure the installation has the correct fuse/circuit breaker and RCD to withstand the constant load. A 13A plug is not sufficient for the continuous current draw of this heater. Please refer to BS7671 for guidance on continuous loads over 2kW.

Shipping weight: 34kg per heater. Packed in a crate measuring 157.45cm x 33.03cm x 45.72cm.

If you are based outside of the UK, please contact us at info@spatec.co.uk with your address details and part information for a delivery quotation.

• Cold Submersible Pump Heater — 3kW
• Enclosure: Self colour aluminium protected to IP66
• Element: Rod type with Incoloy 825 sheaths
• Immersed: Stainless steel
• Rating: 3kW standard
• Voltage: 240V single phase
• Cable: 5m supply cable
• Manufacturers warranty: 12 months
• Please note: This element is made to order and will take a few weeks.